Project

General

Profile

Forums » GOautodial Help »

Carrier config with static ip not working

Added by Brett Nemeroff almost 12 years ago

Hello allo, using 3.0 here.

Adding a carrier without registration (connected with static ip).

In the Account entry section it looks like this:

[goautodial]
disallow=all
allow=gsm
allow=ulaw
type=friend
username=goautodial
host=my.carrier.name
dtmfmode=rfc2833
context=trunkinbound
qualify=yes
insecure=very
nat=yes

But when I save that and view sip-vicidial.conf I actually get this:
[goautodial]
disallow=all
allow=gsm
allow=ulaw
type=friend
username=goautodial
host=peer.voxox.com
dtmfmode=rfc2833
context=trunkinbound
qualify=yes
insecure=very
nat=yes

type=friend
host=dynamic
canreinvite=no
context=default

Notice the 4 added lines at the bottom. The host=dynamic mucks everything up. Am I doing something wrong here?

Thanks,
Brett


Replies (4)

RE: Carrier config with static ip not working - Added by Chris Lomuntad almost 12 years ago

Hi Brett,

We've tried replicate the issue you posted and put the one you posted above on the Account Entry text box and waited for the asterisk to reload and didn't get the same issue as what you've posted above... below is the one i've entered on the Account Entry box and didn't get the additional 4 lines that you've mentioned:

[goautodial]
disallow=all
allow=gsm
allow=ulaw
type=friend
username=goautodial
host=peer.voxox.com
dtmfmode=rfc2833
context=trunkinbound
qualify=yes
insecure=very
nat=yes

Cheers,
Chris

Carrier_Issue.PNG (10.9 KB) Carrier_Issue.PNG

RE: Carrier config with static ip not working - Added by Guillermo Krepper almost 12 years ago

Hi

I am experiencing the same issue

Has this been fixed?

thanks

RE: Carrier config with static ip not working - Added by Demian Biscocho almost 12 years ago

What's the build version of the GOadmin you are using?

RE: Carrier config with static ip not working - Added by Guillermo Krepper almost 12 years ago

Hi

GoAdmin ® 3.0-1369195200

However I thing it is related with "Template ID" option in Carriers section.
I believe this adds the lines that cause the problem (have not looked at code, just assuming).
I could not change this after carrier creation so needed to create a new one.

This worked for me. Hope it helps someone else.

Thanks

    (1-4/4)     Go to top