Project

General

Profile

How to use multiple carriers or fail over

Added by Rameez Amjad about 5 years ago

Good Day,
I am using goautodial 3.3, 64 bit verison recently updated, i want to know how can i use failover carrier.

I want to use send calls through 2 or 3 carriers if it fails to carrier 1 it should send it to second one, is that possible and if yes then what would be the dialplan settings?

Here are current dialplan settings for our carrier, Thanks.

[XYZ]
disallow=all
allow=g729
allow=gsm
allow=ulaw
type=friend
host=ABC.COM
dtmfmode=rfc2833
context=trunkinbound
qualify=yes
canreinvite=no
nat=yes

XYZ=SIP/XYZ

exten => _91XXXXXXXXXX,1,AGI
exten => _91XXXXXXXXXX,2,Dial(SIP/${EXTEN:1}@XYZ,,tTo)
exten => _91XXXXXXXXXX,3,Hangup


Replies (1)

RE: How to use multiple carriers or fail over - Added by Demian Biscocho almost 5 years ago

Easiest and would be:

exten => _91XXXXXXXXXX,1,AGI
exten => _91XXXXXXXXXX,n,Dial(SIP/${EXTEN:1}@XYZ,,tTo)
exten => _91XXXXXXXXXX,n,Dial(SIP/${EXTEN:1}@ABC,,tTo)
exten => _91XXXXXXXXXX,n,Dial(SIP/${EXTEN:1}@DEF,,tTo)
exten => _91XXXXXXXXXX,n,Hangup

Direct failovers without checking call failure statuses and etc. Works quite well.

    (1-1/1)
    Go to top