Project

General

Profile

Forums » GOautodial Help »

PRI configuration

Added by Andres Hernandez over 13 years ago

Hi to all, I recently have installed goautodial (Vicidialnow), but I can get a configuration off pri spans, any one know how to do it??

I have been probe it writing the configuration in:
\dahdi\system.conf.
\etc\asterisk\zapata.conf.

But I don't have idea why isn't working for me.

When I put this commands:
go*CLI> dahdi show status
Description Alarms IRQ bpviol CRC4
Digium Wildcard TE110P T1/E1 Card 0 OK 0 0 0
go*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret

This conmmand don't show me the channels,

Please anyone that can help me.....

Regards


Replies (3)

RE: PRI configuration - Added by Jerico James Milo over 13 years ago

The TE110P board is now getting a bit old...it is very prone to IRQ timing issues.

----------------
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

loadzone = uk
defaultzone = uk

in zaptel/dahdi..

[channels]
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=1
inbanddisconnect=yes
callgroup=1
pickupgroup=1
immediate=no
channel => 1-15,17-31

--restart asterisk and you should find that the green light on the back of the card pops into life.

RE: PRI configuration - Added by Jerico James Milo over 13 years ago

Additional info:
RED: Loss of signal: The equipment shall assume "loss of signal"
BLUE: alarm indication signal: The alarm indication signal is used to indicate loss of layer 1 capability in the ET-to-TE direction on the network side of the user-network interface.
YELLOW: remote alarm indication: The remote alarm indication signal indicates loss of layer 1 capability at the user-network interface.

RE: PRI configuration - Added by wasef anwar about 13 years ago

What are the PRI cards that are recommended , or are better off use with the current version of goautodial 2.1 final .

    (1-3/3)     Go to top