Project

General

Profile

IAX Configuration HELP PLEASE

Added by fourti mohamed over 7 years ago

Hello
I use Goautodial 3.3 ,, My Voip Provider give me a IAX2 TRUNK ,,,BUT Its Not WORKINk

register => AAAAA::4569/AAAAA

[FRIAx]
disallow=all
allow=gsm
allow=ulaw
type=friend
dtmfmode=rfc2833
context=trunkinbound
qualify=yes
insecure=very
nat=yes
host=193.202.111.189
username=AAAAA
secret=xxxxx
allow=alaw
allow=g729

My DIAL PLAN :
exten => _933X.,1,AGI
exten => _933X.,2,Dial(IAX2/FRIAx/${EXTEN:4}@FRIAx,,tTo)
exten => _933X.,3,Hangup

Its Registred :
Host dnsmgr Username Perceived Refresh State
193.202.111.189:4569 N RR83e44N3c 41.231.82.41:1078 60 Registered
127.0.0.1:41569 N ASTblind 127.0.0.1:58864 60 Registered
127.0.0.1:40569 N ASTloop 127.0.0.1:49173 60 Registered

BUt Call Not go on :

[Sep 29 13:19:15] -- Executing [933490046573@default:1] AGI in new stack
[Sep 29 13:19:15] -- <SIP/8001-000e5a3f>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Sep 29 13:19:15] -- Executing [933490046573@default:2] Dial("SIP/8001-000e5a3f", "IAX2/FRIAx/490046573@FRIAx,,tTor") in new stack
[Sep 29 13:19:15] -- Called IAX2/FRIAx/490046573@FRIAx
[Sep 29 13:19:16] -- Hungup 'IAX2/FRIAx-13954'
[Sep 29 13:19:16] Everyone is busy/congested at this time (1:0/0/1)
[Sep 29 13:19:16] -- Executing [933490046573@default:3] Hangup("SIP/8001-000e5a3f", "") in new stack
[Sep 29 13:19:16] Spawn extension (default, 933490046573, 3) exited non-zero on 'SIP/8001-000e5a3f'
[Sep 29 13:19:16] -- Executing [h@default:1] AGI in new stack
[Sep 29 13:19:16] -- <SIP/8001-000e5a3f>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----50-----CHANUNAVAIL---------- completed, returning 0
[Sep 29 13:19:24] Using SIP RTP CoS mark 5
[Sep 29 13:19:24] -- Executing [933490046573@default:1] AGI in new stack
[Sep 29 13:19:24] -- <SIP/8001-000e5a40>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Sep 29 13:19:24] -- Executing [933490046573@default:2] Dial("SIP/8001-000e5a40", "IAX2/FRIAx/490046573@FRIAx,,tTor") in new stack
[Sep 29 13:19:24] -- Called IAX2/FRIAx/490046573@FRIAx
[Sep 29 13:19:24] -- Hungup 'IAX2/FRIAx-12078'
[Sep 29 13:19:24] Everyone is busy/congested at this time (1:0/0/1)
[Sep 29 13:19:24] -- Executing [933490046573@default:3] Hangup("SIP/8001-000e5a40", "") in new stack
[Sep 29 13:19:24] Spawn extension (default, 933490046573, 3) exited non-zero on 'SIP/8001-000e5a40'
[Sep 29 13:19:24] -- Executing [h@default:1] AGI in new stack
[Sep 29 13:19:24] -- <SIP/8001-000e5a40>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----50-----CHANUNAVAIL---------- completed, returning 0
[Sep 29 13:19:39] Using SIP RTP CoS mark 5
[Sep 29 13:19:39] -- Executing [933322310830@default:1] AGI in new stack
[Sep 29 13:19:39] -- <SIP/8001-000e5a41>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Sep 29 13:19:39] -- Executing [933322310830@default:2] Dial("SIP/8001-000e5a41", "IAX2/FRIAx/322310830@FRIAx,,tTor") in new stack
[Sep 29 13:19:39] -- Called IAX2/FRIAx/322310830@FRIAx
[Sep 29 13:19:39] -- Hungup 'IAX2/FRIAx-4286'
[Sep 29 13:19:39] Everyone is busy/congested at this time (1:0/0/1)
[Sep 29 13:19:39] -- Executing [933322310830@default:3] Hangup("SIP/8001-000e5a41", "") in new stack
[Sep 29 13:19:39] Spawn extension (default, 933322310830, 3) exited non-zero on 'SIP/8001-000e5a41'
[Sep 29 13:19:39] -- Executing [h@default:1] AGI in new stack
[Sep 29 13:19:39] -- <SIP/8001-000e5a41>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----50-----CHANUNAVAIL---------- completed, returning 0

Please I need Some help here
Thanks


Replies (1)

RE: IAX Configuration HELP PLEASE - Added by Wittie Manansala over 7 years ago

Hi,

Please see below suggestions:

1. On your Carrier Settings make sure Protocol=IAX2.
2. Coordinate to your VOIP provider if they seeing iax2 registration on their side and the call you've made.
3. Ask your VOIP Provider if they required ANI or CallerID to make calls, Dial prefix or preferred codec/s/

Thank you

    (1-1/1)
    Go to top