Project

General

Profile

Forums » GOautodial Help »

Help w/Install

Added by M Hunter over 9 years ago

Hello, wondering if someone could help out. Doing an install. Have a test trunk setup and dialing out when straight dialing from a softphone. When in the application, Goautodial will not dial the number in the list or any number. Version is 3

[Oct 15 15:36:49] > Channel SIP/8014-000000c5 was answered.
[Oct 15 15:36:49] -- Executing [8600053@default:1] MeetMe("SIP/8014-000000c5", "8600053,F") in new stack
[Oct 15 15:36:49] Parsing '/etc/asterisk/meetme.conf': [Oct 15 15:36:49] Found
[Oct 15 15:36:49] Parsing '/etc/asterisk/meetme-vicidial.conf': [Oct 15 15:36:49] Found
[Oct 15 15:36:49] -- Created MeetMe conference 1023 for conference '8600053'
[Oct 15 15:36:49] Manager 'sendcron' logged off from 127.0.0.1
[Oct 15 15:36:49] -- <SIP/8014-000000c5> Playing 'conf-onlyperson.gsm' (language 'en')
[Oct 15 15:37:01] Manager 'sendcron' logged on from 127.0.0.1
[Oct 15 15:37:01] Manager 'sendcron' logged on from 127.0.0.1
[Oct 15 15:37:01] Manager 'sendcron' logged off from 127.0.0.1
[Oct 15 15:37:03] Manager 'sendcron' logged off from 127.0.0.1
[Oct 15 15:37:06] Manager 'sendcron' logged on from 127.0.0.1
[Oct 15 15:37:06] Manager 'sendcron' logged off from 127.0.0.1
[Oct 15 15:37:12] Manager 'sendcron' logged on from 127.0.0.1
[Oct 15 15:37:12] -- Executing [8600053@default:1] MeetMe("Local/8600053@default-00000085;2", "8600053,F") in new stack
[Oct 15 15:37:12] > Channel Local/8600053@default-00000085;1 was answered.
[Oct 15 15:37:12] -- Executing [115553401366@default:1] AGI in new stack
[Oct 15 15:37:12] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 15 15:37:12] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=TESTCAMP))
[Oct 15 15:37:12] -- <Local/8600053@default-00000085;1>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Oct 15 15:37:12] -- Executing [115553401366@default:2] Dial("Local/8600053@default-00000085;1", "SIP/115553401366@Fpbx2,,tTo") in new stack
[Oct 15 15:37:12] Using SIP RTP CoS mark 5
[Oct 15 15:37:12] -- Called SIP/115553401366@Fpbx2
[Oct 15 15:37:12] -- Got SIP response 480 "Temporarily Unavailable" back from 192.159.66.3:5060
[Oct 15 15:37:12] -- SIP/Fpbx2-000000c6 is circuit-busy
[Oct 15 15:37:12] Everyone is busy/congested at this time (1:0/1/0)
[Oct 15 15:37:12] -- Executing [115553401366@default:3] Hangup("Local/8600053@default-00000085;1", "") in new stack
[Oct 15 15:37:12] Spawn extension (default, 115553401366, 3) exited non-zero on 'Local/8600053@default-00000085;1'
[Oct 15 15:37:12] -- Executing [h@default:1] AGI("Local/8600053@default-00000085;1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----19-----CONGESTION----------") in new stack
[Oct 15 15:37:12] -- <Local/8600053@default-00000085;1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----19-----CONGESTION---------- completed, returning 0
[Oct 15 15:37:12] Spawn extension (default, 8600053, 1) exited non-zero on 'Local/8600053@default-00000085;2'
[Oct 15 15:37:12] -- Executing [h@default:1] AGI in new stack
[Oct 15 15:37:12] -- <Local/8600053@default-00000085;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
[Oct 15 15:37:12] Manager 'sendcron' logged on from 127.0.0.1
[Oct 15 15:37:12] -- Executing [58600053@default:1] MeetMe("Local/58600053@default-00000086;2", "8600053,Fmq") in new stack
[Oct 15 15:37:12] > Channel Local/58600053@default-00000086;1 was answered.
[Oct 15 15:37:12] -- Executing [8309@default:1] Answer("Local/58600053@default-00000086;1", "") in new stack
[Oct 15 15:37:12] -- Executing [8309@default:2] Monitor("Local/58600053@default-00000086;1", "wav,20151015-153711_XXXXXXXXXX") in new stack
[Oct 15 15:37:12] Manager 'sendcron' logged off from 127.0.0.1
[Oct 15 15:37:12] -- Executing [8309@default:3] Wait("Local/58600053@default-00000086;1", "3600") in new stack
[Oct 15 15:37:38] == Spawn extension (default, 8600053, 1) exited non-zero on 'SIP/8014-000000c5'
[Oct 15 15:37:38] -- Executing [h@default:1] AGI in new stack
[Oct 15 15:37:38] -- <SIP/8014-000000c5>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0

DialPlan
exten => _NXXNXXXXX.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _NXXNXXXXX.,2,Dial(SIP/${EXTEN:11}@Fpbx2,,tTo)
exten => _NXXNXXXXX.,3,Hangup

Any help would be appreciated.


Replies (2)

RE: Help w/Install - Added by Wittie Manansala over 9 years ago

Hi,

Please refer on below link about your dialplan.

http://goautodial.org/projects/goautodialce/wiki/Carrier_Sample_Configuration

Make sure the coordinate to following information to your VOIP provider before creating a dialplan:

1. Gateway or Server IP
2. Required Dial Pattern (for US or International call)
3. Required Dial prefix (if any)
4. Required ANI or CallerID (if any)
5. Required Codec

Thank you

RE: Help w/Install - Added by M Hunter over 9 years ago

Thank you. I can connect a softphone and dial out without any issue. The dialplan in the carrier settings does work. Looking closer, I am unable to associate a campaign with a carrier. I can only choose custom dialplan in the campaign settings when it appears I should be able to select the actual carrier to use.

    (1-2/2)     Go to top